Column Compartment/oven with superior thermal performance, multistage (10 ramps) programmed temperature control function. (supported by “control system”) Advanced built-in data acquisition system , supporting real time instrument status monitoring, detection signal acquisition and PC control Column oven accommodates up to 3 chromatographic columns, and supports quick heat-up and rapid cool-down with automated back-door opening. 450℃ to 50℃ in 6 min at 25℃ ambient) Flexible sample introduction system: 3 sample injectors could be installed and operated simultaneously with independent temperature control. High sensibility and stability detector. 2 independent and analog signals output. Clarity software, compatible with GLP/FDA-21 CFR Part11 requirements and regulations. (electronic records and signatures) Special analyzers, like RGA, NGA, PINDA, etc. according to ASTM standards
Superior performance with advanced, microcomputer-based temperature control system High temperature accuracy (optimum ± 0.02℃), high reliability, and anti-interference Self-diagnosis/ self-protection function (overheat protection, power-off protection, etc.) Intuitive display of timing program, detector status, measurement range, current setting, etc
Technical Parameters:
Models
GC1290
GC1120
Description
EPC
Sample Introduction System
sample injector and evaporation chamber
Column Oven
Temperature range
Ambient temperature +7 °C ~ 400 °C (in 1 °C increment)
Temperature accuracy
± 0.02 °C
Cooling time
400 °C to 50 °C in 6 min at 25 °C ambient
Programmed temperature setting
0.1 °C 70 °C /min (in 1 °C increment)
FID
Detection limit
<3xlO-12g/s(C16)
Drift
<6xlO_13A/h
TCD
Sensitivity
> SOOOmVmL/mg
Baseline noise
<20^V
FPD
Detection limit
< 8xlO*13g/s(P); < 8xl041g/s(S)
Drift
<2xl0-11.W0min
Baseline noise
<5x1042A
ECD
Detection limit
<2xl0 13g/s(7-666)
Drift
< 80gV/30min
Baseline noise
<20^V
Linear dynamic range
>103
NPD
Detection limit
< 5xl043g/s(P); < 5xlO_12g/s(N)
Enquiry Form ( we will get back you as soon as possible )