Light source: Top mounted LED lighting panel, top mounted light source, infinite dimming.
Illuminance: 0-5000LX
Number of illumination layers: 3 layers
Temperature control accuracy: 0.1 ℃
Temperature fluctuation: ± 0.5-1.0 ℃
Humidity control range: 50% RH to 95% RH (humidity control is not applicable below 6 ℃, except for special users)
Humidity control accuracy: 1% RH
Humidity fluctuation: ± 3-5% RH
Heating time: 60 minutes from 10 ° C to 40 ° C
Cooling time: 60 minutes from 40 ° C to 10 ° C
Range of illumination adjustment: 0-100% Emax stepless dimming
Wind direction and speed inside the workspace: Near horizontal 0.1m/s to 0.3m/s
Compressor working mode: intermittent operation
Disinfection method: UV disinfection lamp
Service life of LED lighting board: 50000 hours
Instrument operation mode: Continuous operation throughout the year.
Power supply: 50Hz; 220V ±10%
Specification
Using LED cold light source for illumination, it generates very little heat, making the temperature inside the box more stable.
The top of the box is vertically illuminated with four layers of lighting panels, making the lighting at any point inside the box more uniform and changing the previous disadvantage of strong lighting on both sides and weak lighting in the middle.
Infinite dimming: Using the required light intensity set by the control panel to increase or decrease the current to change the intensity of the light, making the light intensity more accurate and completely changing the previous disadvantage of changing the number of lamps to change the intensity of the light.
The new box adopts a circulating air supply system, which evenly blows air out from each layer through air ducts, changing the disadvantage of large temperature differences between the upper and lower parts of the second-generation box and making the temperature inside the box more uniform.
The spectrum of the third-generation climate chamber LED light board is closer to natural light, and the long service life of the LED light board makes the culture closer to the natural environment.
Energy consumption is saved by more than 70% compared to second-generation incubators.
International brand compressors ensure long-term continuous operation of testing equipment, using environmentally friendly refrigerant (R134a), high efficiency, low energy consumption, and promoting energy conservation.
Enquiry Form ( we will get back you as soon as possible )